創維9s52機型求助

17372631143 · 發表于 2020-3-23 22:51:32

工廠模式替換開機圖片后紅燈亮不開機，串口信息如下，回車進不去刷機liux，求救�。。�:'(
開機串口信息
UART_115200

AC_ON
MIU0_DQS-OK
MIU1_DQS-OK
BIST0-OK
BIST1-OK
789A789A#_mNOTICE:  BL3-1: v1.1(debug):177109e
NOTICE:  BL3-1: Built : 11:33:07, Sep 19 2016
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Initializing BL3-2
NOTICE:  [Ian] opteed_synchronous_sp_entry 103 20104dd4
ERR TEE-CORE:bootcfg_get_memory:249:  [Ian] bootcfg_get_memory 249 Hook

ERR TEE-CORE:bootcfg_get_memory:268:  [Ian] MEM_AREA_NSEC_SHM PA bootcfg_get_memory 268 a2e00000

ERR TEE-CORE:bootcfg_get_memory:269:  [Ian] MEM_AREA_NSEC_SHM SIZE bootcfg_get_memory 269 300000

ERR TEE-CORE:bootcfg_get_memory:273:  [Ian] bootcfg_get_memory 273 First

ERR TEE-CORE:bootcfg_get_memory:281:  [Ian] MEM_AREA_NSEC_SHM PA bootcfg_get_memory 281 5fb00000

ERR TEE-CORE:bootcfg_get_memory:282:  [Ian] MEM_AREA_NSEC_SHM SIZE bootcfg_get_memory 282 300000

ERR TEE-CORE:bootcfg_get_memory:298:  [Ian] MEM_AREA_NSEC_SHM PA bootcfg_get_memory 298 a2e00000

ERR TEE-CORE:bootcfg_get_memory:299:  [Ian] MEM_AREA_NSEC_SHM SIZE bootcfg_get_memory 299 300000

ERR TEE-CORE:bootcfg_get_memory:309:  [Ian] MEM_AREA_NSEC_SHM PA bootcfg_get_memory 309 5fb00000

ERR TEE-CORE:bootcfg_get_memory:310:  [Ian] MEM_AREA_NSEC_SHM SIZE bootcfg_get_memory 310 300000

ERR TEE-CORE:call_early_param:91:  [Ian] call_early_param 91 CID=90014a484147346132a559592e8325

ERR TEE-CORE:EMMC_CID_Init:159:  [Ian] EMMC_CID_Init 159 bootargs 0x20104dd8

ERR TEE-CORE:EMMC_CID_Init:160:  [Ian] EMMC_CID_Init 160 bootargs 90014a484147346132a559592e8325 0x5d27cc48

ERR TEE-CORE:init_primary_helper:331: Initializing (OPTEE.MASERATI.1.0.1_securestore_dev_20160913 #2 Mon Sep 19 03:32:42 UTC 2016 arm)

utopia initregister module: MODULE_AESDMA

register module: MODULE_SYS

register module: MODULE_XC

register module: MODULE_SEM

[Utopia][SEM]: Function = SEMRegisterToUtopia, Line = 448, SEM_Init is opened

[Utopia][SEM]: Function = SEMRegisterToUtopia, Line = 450, SEM Register finished

register module: MODULE_GFX

[XC,Version]

[XC,Version]

ERR TEE-CORE:mmap_handler:405: Enter mmap handler

ERR TEE-CORE:mmap_handler:416: buf:08 00 00 00

ERR TEE-CORE:_video_drv_init:367: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:368: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:369: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:370: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:371: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:372: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:373: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:374: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:375: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:_video_drv_init:376: [WARRNINIG] Bitstream sub addr is not the same with MVC buffer

ERR TEE-CORE:GetMmapInfo:130: MmapIndex 1 is invalid

ERR TEE-CORE:tee_get_phy_addr:147: get memory map  fail

ERR TEE-CORE:GetMmapInfo:130: MmapIndex 1 is invalid

ERR TEE-CORE:tee_get_phy_size:166: get memory map  fail

VDEC VPU_CodeAddr 80000000

VDEC VPU_CodeSize 300000

VDEC Framebuffer_StartAddr_Main 0

VDEC Framebuffer_Size_Main 0

VDEC Bitstream_StartAddr_Main 80c00000

VDEC Bitstream_Size_Main 1000000

VDEC Framebuffer_StartAddr_Sub 89f00000

VDEC Framebuffer_Size_Sub 5200000

VDEC Bitstream_StartAddr_Sub 81c00000

VDEC Bitstream_Size_Sub 1000000

VDEC VPU_SHMAddr 80800000

VDEC VPU_SHMSize 60000

VDEC MIU1_StartAddr 80000000

ERR TEE-CORE:policymgr_handler:431: Enter policy mgr handler

ERR TEE-CORE:policymgr_handler:442: buf:5b 39 61 30

ERR TEE-CORE:isomgr_handler:455: Enter isomgr handler

ERR TEE-CORE:isomgr_handler:466: buf:0a 5b 74 61

ERR TEE-CORE:init_mstar_middleware:552: parsing done

ERR TEE-CORE:GetStartSAddrByMmapId:354: mmapGroup index is invalid

ERR TEE-CORE:GetSRangeByMmapId:377: mmapGroup index is invalid

ERR TEE-CORE:GetStartSAddrByMmapId:354: mmapGroup index is invalid

ERR TEE-CORE:GetSRangeByMmapId:377: mmapGroup index is invalid

ERR TEE-CORE:GetStartSAddrByMmapId:354: mmapGroup index is invalid

ERR TEE-CORE:GetSRangeByMmapId:377: mmapGroup index is invalid

ERR TEE-CORE:GetStartSAddrByMmapId:354: mmapGroup index is invalid

ERR TEE-CORE:GetSRangeByMmapId:377: mmapGroup index is invalid

[Utopia][SYS]: Function = SYSOpen, Line = 1115, current resource pri_shm content is: 0

[Utopia][SYS]: Function = SYSOpen, Line = 1134, [SYS INFO] OPEN INSTANCE...

INNOO    CP12 PrepariggffrrEE33eeii  oo eecure world
IIFFO: CCUU  eettiimag  pprr==001133110066

                                    INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x20100948
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode
INFO: R1 0
INFO: R2 0
INFO: R3 0
U
Relocation Offset is: 01600000
[AT][MB][start ub][1396]

U-Boot 2011.06-00138-gb6db36f-dirty (Mar 22 2019 - 14:16:50)

[Utopia][SYS]: Function = SYSOpen, Line = 1115, current resource pri_shm content is: 0
[Utopia][SYS]: Function = SYSOpen, Line = 1134, [SYS INFO] OPEN INSTANCE...
create instance at 32172790 with private size 128 bytes at 321727E0
[Utopia][MIU]:
[MIU INFO] miu opencreate instance at 32172868 with private size 96 bytes at 321728B8
create instance at 32172920 with private size 56 bytes at 32172970

uboot held at [31DDDF60~33100000],size=013220A0
DRAM:  305 MiB
Now running in RAM - U-Boot at: 32600000

eMMC: HS400 200MHz
eMMC 14.67 GB [1D59FF8h]
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Get MAC from ethaddr env
MAC:  0x28: 0x35: 0x45: 0x18:0x4C: 0x51
[Utopia][CPU]:
[CPU INFO] cpu opencreate instance at 32182DE8 with private size 44 bytes at 32182E38
[Utopia][CPU]: CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: `2`2`2 `2``2`2xV4

DRAM_SIZE1=1024 MB
DRAM_SIZE2=1024 MB
[AT][MBoot][Driver Init][1527]
func:mmcBin_Init init Success
eeprom read:28:35:45:18:4C:51
(hjn)bSelectModelViaProjectID = 1
(hjn)u32ProjectIdAddr = 0x1DFC00
(hjn)u32ProjectIdBackupAddr = 0x1DFE00
u32ProjectIdAddr = 0x1DFC00 u32ProjectIdBackupAddr = 0x1DFE00
eep_id = 0x5, u8project_id = 0x5
FactoryDB_Copy = 0x0
bFactoryDB_Copy = 0
mmc change mount : factory
Size of file "/sys.ini" from mmc device 0 partition factory: 4518 bytes
Loading file "/sys.ini" at offset 0x0 from mmc device 0 partition factory
4518 bytes read
sizeof( sys ini script ) --------> 4518 bytes
set platform=mi to bootargs OK
(hjn)u16MaxProjectID = 0x37
(hjn)u32ProjectIdAddr = 0x1DFC00
(hjn)u32ProjectId = 0x5
Half model.ini path --> /factory/atv/panel/9S52_H8M/model/Customer_5.ini
Full model.ini  path --> /factory/atv/panel/9S52_H8M/model/Customer_5.ini
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
mmc change mount : factory
Size of file "/atv/panel/9S52_H8M/model/Customer_5.ini" from mmc device 0 partition factory: 18631 bytes
Loading file "/atv/panel/9S52_H8M/model/Customer_5.ini" at offset 0x0 from mmc device 0 partition factory
18631 bytes read
mmc change mount : factory
Size of file "/atv/panel/9S52_H8M/model/Customer_5.ini" from mmc device 0 partition factory: 18631 bytes
Loading file "/atv/panel/9S52_H8M/model/Customer_5.ini" at offset 0x0 from mmc device 0 partition factory
18631 bytes read
sizeof( model ini script ) --------> 18631 bytes
Half panel.ini path --> /factory/atv/panel/9S52_H8M/pq/05_MZ_55_UHD_H8M_7626-HQ4A0L-T002/panel.ini
Half panel.ini change str to --> /atv/panel/9S52_H8M/pq/05_MZ_55_UHD_H8M_7626-HQ4A0L-T002/panel.ini
Full panel.ini  path --> /atv/panel/9S52_H8M/pq/05_MZ_55_UHD_H8M_7626-HQ4A0L-T002/panel.ini
Half board.ini path --> /config/board.ini
Full board.ini  path --> /config/board.ini

MIRROR_OSD is  --> False
--wya-- parse_model_ini temp_safemode =0
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
--wya-- parse_model_ini temp_ldm =0
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Load_Tcon_config IN
mmc change mount : factory
Size of file "/atv/panel/9S52_H8M/pq/05_MZ_55_UHD_H8M_7626-HQ4A0L-T002/panel.ini" from mmc device 0 partition factory: 40207 bytes
Loading file "/atv/panel/9S52_H8M/pq/05_MZ_55_UHD_H8M_7626-HQ4A0L-T002/panel.ini" at offset 0x0 from mmc device 0 partition factory
40207 bytes read
Load_Tcon_config sizeof( model panel PnlPath ini script ) --------> 40207 bytes
Load_Tcon_ini: m_bPanelInternalTCON = 0
Load_Tcon_ini m_bPanelInternalTCON : 2
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
mmc change mount : factory
Size of file "/atv/panel/9S52_H8M/model/Customer_5.ini" from mmc device 0 partition factory: 18631 bytes
Loading file "/atv/panel/9S52_H8M/model/Customer_5.ini" at offset 0x0 from mmc device 0 partition factory
18631 bytes read
mmc change mount : tvconfig
Size of file "/config/module/Customer_Module.ini" from mmc device 0 partition tvconfig: 2285 bytes
Loading file "/config/module/Customer_Module.ini" at offset 0x0 from mmc device 0 partition tvconfig
2285 bytes read
sizeof( module ini script ) --------> 2285 bytes
mmc change mount : tvconfig
Size of file "/boot.ini" from mmc device 0 partition tvconfig: 232 bytes
Loading file "/boot.ini" at offset 0x0 from mmc device 0 partition tvconfig
232 bytes read
sizeof( boot ini script ) --------> 232 bytes
gMusicPath --> /boot0.mp3
u16LogoType:0
mmc change mount : system
Size of file "/media/bootlogo_Skyworth.jpg" from mmc device 0 partition system: 6963100 bytes
parse_boot_ini line(1574),customer logo do exsit,/media/bootlogo_Skyworth.jpg
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
gLogoPath --> /media/bootlogo_Skyworth.jpg
m_u32MusicVol -> [0x14]
mmc change mount : system
Size of file "/media/bootlogo_Skyworth.jpg" from mmc device 0 partition system: 6963100 bytes
mmc change mount :
MPOOL size : 0x200000
[ERROR] prepare_nand_dbtable:1899: mpool data is over mpool volume/partition size
WDT is Enable !!!setenv WDT_ENABLE 0 to disable it.
jump_to_console start!!